Special Purpose Machine :
     Power press Automation High poser and accuracy with a small space requirement Simple use and operation: Compact structure There are three way of control :-

1. With pneumatic valve from the cam of the press.
2. With electric valve from the cam of the press.
3. Directly from the die or the ram of the press with mechanical valve.

Caste Nylon Plant :

Hydrolic Automatic Casting Machine

For viewing long video please right click on the link below and save target as on your system and then double click on it to play on your system
      Download Movie

Hydrolic Automatic Casting Machine

Go Top

Pilot release available for each type
The SPM series may be equipped with :

1. Three ways valve to release air
2. Roller conveyor
3. Connecting block wit both horizontal and vertical adjustment, so that the feeder can be placed as near as possible to the die set.
4. Filter-lubricator
5. rapid stroke device with handle
6. Adjustable support body with safety guard

Go Top

Tin Container Sealer for 1 liter Tin Containers.
Features:

1. Available in customize request.
2. Tempered.
3. Hard.
4. Process with Adjustable Speed to produce customized output
5. Best raw material used.

Go Top
 

     Combine coil cradle straightening units are built to provide a straightened stock to the press for better quality of quality of finished products. Power driven, hardened and ground pinch rollers supported in needle bearings, have enough power to unwind the stock. Hardened and ground straightening rollers centrally adjustable are supported in needle bearings. Loop control system automatically trips the motor on & off and ensures the required stock advance per minute. Variable drive in provided to match the straightened feed according to the feed of the press. Four power driven hardened & ground coil rest rollers in the cradle mounted in antifriction bearing arranged in arc to equalize weight distribution. Both inner frames are very easily adjustable to accommodate stock width.

Go Top